Community Forums

MRUSA14 · 01-07-2014, 06:47 PM

Quote:

Originally Posted by Ann n Gene

Our other best addition was a ceiling fan in the bedroom

Could we see a photo, please?

Ann n Gene · 01-07-2014, 10:34 PM

Here are a couple.

MRUSA14 · 01-08-2014, 11:05 AM

Thanks for the photo. Nice job. I am going to ask Precision for a price. Is there somebody special I should speak to?

Ann n Gene · 01-08-2014, 11:51 AM

Talk to Paul, he will treat you right.

loisjop · 01-08-2014, 12:19 PM

Marc, Paul's phone number at precision paint is 574 546-2406. Noel

MRUSA14 · 01-08-2014, 01:35 PM

Thanks to all.

RLWoud · 01-08-2014, 01:42 PM

Quote:

Originally Posted by andrei

I wouldn't call these my top mods, just the ones I got done so far and have pictures of. I have been having a number of other problems and my Aquahot quit yesterday. I need to call them next. The bathroom towel hooks were hard to keep towels on, added new ones from Lowes, and added two more on right side as you come into the toilet (DEQ). Also added the shelves for chairs with J hooks which someone else posted(that was genius) I added a removable shelf over the fresh water tank for items I will rarely need or use. I used joist hangers to hold two 2X4's and keep above the tank. I also added a knob to the outside of the sliding plexiglass in the screen door, so you can easily close the plexiglass from outside if you have the door open and are just using the screen door. Bought the knobs at Lowes, and used a cut off threaded screw to attach from both sides so as to not have the knobs offset. the knobs are metal and add a little weight to the screen door, it now closes much nicer. I hope the pictures are attached, I don't see them?

We didn't like the position of the towel hooks and the toilet paper roll holder was at my knee when sitting down, so I moved It as far as possible to the door, I found putty in the same colour as the wall to cover the old holes.
The new towel hooks I moved curved wall next to the door, the old holes are cover by candle holder.
It's perfect now, I hope the factory takes notice and make these minor changes.

2014 Aspire DEQ

Swenster · 01-08-2014, 04:18 PM

Quote:

Originally Posted by MRUSA14

Thanks for the photo. Nice job. I am going to ask Precision for a price. Is there somebody special I should speak to?

I talked to Paul today and he quoted something over $600 plus shipping for the medicine cabinet and he would make it any size, width wise.

loisjop · 01-11-2014, 02:12 PM

This our basement freezer. Much larger and cheaper than the factory install.
The slide tray part is sp56-115 mor/stor freezer tray.

loisjop · 01-11-2014, 02:21 PM

More

brobox · 01-11-2014, 02:39 PM

Noel, I had the same freezer in the TS, it was great, but it wouldn't clear the frame for the two way slide. Does it clear in the Anthem? I almost went back with that one, but changed my mind. Now I am wondering if I made the right choice.