Tst tpms

[RayandWendy]

That is my only complaint with TST. The screen needs an adjustable brightness.
Later...
Ray

[Dr. Mike]

I actually never installed the repeater and the system has worked perfectly for thousands of miles!

I use a phone holder (available on Amazon: Lorima Cup Phone Holder for Car, [Easy to Install & Height Adjustable], Cup Holder Phone Mount) for about $17 and it works very well!

Best

Dr. Mike

[Steve 716]

There are two wires behind the rear panel of your closet. One has a constant 12 volts. I spliced into that wire and mounted my repeater on the closet side of the panel in parallel. That way the wire continues to be constantly powered. I then added a toggle switch to toggle the repeater off and on. Otherwise it will be on constantly.

I use the EEZ TPMS but the repeaters are essentially the same. Mine has a light at its center which is on when power is supplied. The switch toggles this light on and off.

[AbuelaLoca]

Please share details how/where you picked up the 12-volt source and what connections you used. Beginner here... Thank you!

Originally Posted by RVWheeler

I mounted mine in the bedroom TV compartment. Picked up a 12v source. Workers great for all rear axles and trailers. Clean & dry.
No lost sensor signals ever.

[Nildecaf]

2. Where did you mount the display unit?



Thanks in advance for your help.

Gerard[/QUOTE]

Display mounted by co-pilot window. That way she can silence occasional over pressure alarms and keep me aware of issues