Would anyone happen to have a diagram of the vanity slide hardware? My vanity slide extends 3-4” at the bottom before the top starts to move and a diagram of the hardware would certainly help with troubleshooting the sloppy movement.
What I have already done...
1. Disassembled, cleaned and lubed the slide topper to confirm it is not binding
2. Adjusted and lubed the two bottom rollers to slightly raise the slide....marks on the outside bottom of the slide indicated that it was dragging on the slide roller mounts
3. Verified that the slide is centered in its recess when the coach is at ride height
4. Slides are only extended/retracted when at verified ride height
5. Checked slide motor and all mounting bolts are tight...lubed everything in sight beneath the metal cover.
6. Verified that there are signs of the topper catching or dragging at the top
Linear Mode
