Community Forums

seeg · 10-14-2021, 01:39 PM

In the never ending quest to get my VT network screen to populate I had an appointment to install v1.4.9 this am. When I checked the software update screen v1.4.10 was available for download. It was released to remedy a shade problem on the F models. Michelle checked with the software engineers and asked me to install v1.4.10 as v 1.4.9 was incorporated within that update. V1.4.9 was designed expressly to deal with the network screen issue. Suffice it to say it didn't work so back to the drawing board. One helpful feature was the wording at the bottom of the network screen has been changed from "Winegard found on network" to a much more helpful "Winegard Indoor and Outdoor units are on and working correctly". Baby steps.

buddy110 · 10-14-2021, 06:14 PM

Quote:

Originally Posted by seeg

In the never ending quest to get my VT network screen to populate I had an appointment to install v1.4.9 this am. When I checked the software update screen v1.4.10 was available for download. It was released to remedy a shade problem on the F models. Michelle checked with the software engineers and asked me to install v1.4.10 as v 1.4.9 was incorporated within that update. V1.4.9 was designed expressly to deal with the network screen issue. Suffice it to say it didn't work so back to the drawing board. One helpful feature was the wording at the bottom of the network screen has been changed from "Winegard found on network" to a much more helpful "Winegard Indoor and Outdoor units are on and working correctly". Baby steps.

Interesting; .8 resolved half of my tank sensor issue and now my network screen populates fairly quickly. The nebula app, however takes forever to connect now. two steps forward, one back. My black tank now reads fine, but is slow to react. IOW, it will read static levels, but when rinsing the sensor doesn't read levels

seeg · 10-14-2021, 06:25 PM

.7 or .8, I’m not sure which, resolved all my tank issues. I guess I should check again to be sure but the all worked the last time I dumped the black and grey tanks. It was nice to be able to use the tank monitors in the wet bay to watch the levels change rather than just guess where they were at. Nebula loads quickly too, only complaint is the network screen.

buddy110 · 10-15-2021, 04:04 AM

Quote:

Originally Posted by seeg

.7 or .8, I’m not sure which, resolved all my tank issues. I guess I should check again to be sure but the all worked the last time I dumped the black and grey tanks. It was nice to be able to use the tank monitors in the wet bay to watch the levels change rather than just guess where they were at. Nebula loads quickly too, only complaint is the network screen.

I have a flow meter.

brobox · 10-15-2021, 04:29 AM

Quote:

Originally Posted by buddy110

Interesting; .8 resolved half of my tank sensor issue and now my network screen populates fairly quickly. The nebula app, however takes forever to connect now. two steps forward, one back. My black tank now reads fine, but is slow to react. IOW, it will read static levels, but when rinsing the sensor doesn't read levels

These updates are crazy how they affect each coach differently. I just checked the Nebula app sitting here at my desk and it "pop" on my phone, fastest it's ever been. The wifi screen populates much faster, but the black tank sensor is still reads "E" I'll try the new update and may get lucky with 3 out of 3.

seeg · 10-15-2021, 11:22 AM

Chuck
Did you ever change or replace your black tank sensor. IIRC Entegra was going to send you one.

brobox · 10-15-2021, 01:12 PM

Quote:

Originally Posted by seeg

Chuck
Did you ever change or replace your black tank sensor. IIRC Entegra was going to send you one.

I just received them. We have a trip over to Ft Lauderdale the first of the month. I am going to try the new update and see what happens that weekend. If that does not work, I will change it.