Water valves for clothes washer?
I have a 40 foot 2019 Entegra Insignia. This model was discontinued for 2020 but is very similar to the Aspire.
The clothes washer is located in the master bathroom. It has no water flow to the appliance. Although we seldom used the clothes washer and dryer, they were operating properly earlier this year. I want to also mention that we had our bus at the mothership in April, and they worked on the toilet in the master bath. My suspicion is that a water valve leading to the clothes washer was inadvertently left shut while other service was done at the factory.
QUESTION: Is there a water valve that controls water to the clothes washer and if so, where is it typically located? I looked in the wet bay, under the sink in the master bath, behind the master toilet but found nothing. I wanted to ask before I have to unbolt the stacked clothes dryer to look behind the clothes washer, but that is my next move. My gut tells me that a water valve wouldn't be buried behind the washer because it would be very difficult to get to without dismantling the system.
It just occurred to me while making this post that I didn't check in the area of the propane (not diesel) Aquahot. The factory did service the Aquahot and could have possible closed a valve there???
Anybody know if there is a water valve controlling flow to the clothes washer and where this elusive valve is located?
Wringing the most out of life, above and below sea level
2019 Entegra Insignia 40B2 Motorhome
2016 Livin Lite Ford 6.8 Truck Camper