Battery Monitor for Dynamax isata3

[richguess]

Hello All—I have a MB based New to me 2021 Dynamax Isata 3. It has 2 AGM coach batteries under the entry steps. I installed a Renogy shunt type battery monitor on my prior class A gasser. Has anybody installed one,or a similar one, in this location? I do have an inverter hooked up, which is a factory install, but it doesn’t look like a lot of other stuff. It has 200w solar and a 30 amp controller.

Thx in advance

Rich Guess

[Paul_D]

I have a 2016 Sprinter based class C and added a Thornwave PowerMon and shunt. The shunt is mounted in the battery area under the step. The PowerMon is in the cabinet closest to the door. I hooked up the chassis battery sense wire, so I have chassis and house voltage. The shunt is on the ground wire (easier connection).
It has great BlueTooth range (I can check it from the house ~40 feet)
The PowerMon shows chassis and house voltage, house current, power, charge, battery capacity, peak current, temperature (remote or ambient), also logs data and can control a relay.

[Paul_D]

Here's a link
https://www.thornwave.com/products/b...dc-power-meter.

[richguess]

Got, thx.