Community Forums

GRbikes · 05-16-2022, 05:33 AM

Does anyone have the HWH leveling system installed on their 2019 or newer Sprinter Winnebago View? I have some questions.

Srjniwot · 05-23-2022, 06:12 AM

I have them installed on a 2021 View

GRbikes · 05-25-2022, 07:09 AM

Quote:

Originally Posted by Srjniwot

I have them installed on a 2021 View

!. Did you keep your spare tire?
2. Was your VIEW equipped with stabilizer jacks and did you keep them?

Thanks GR

Srjniwot · 05-26-2022, 05:57 AM

Quote:

Originally Posted by GRbikes

!. Did you keep your spare tire?
2. Was your VIEW equipped with stabilizer jacks and did you keep them?

Thanks GR

I did keep the spare tire, I did not keep the stabilizer jacks, (I did not want the extra weight)

eyecando · 06-11-2022, 07:22 AM

Yes, i have the HWH levelers and the spare tire on my 2020 Navion (2019 Chassis). It looks like some disassembly would be required to get the spare out though.

Also, the stabilizers are still installed although they are not likely to be used.

Do the other levelers require the spare tire to be removed.

eyecando · 06-14-2022, 10:49 AM

My HWH levelers quit working. Nothing lit on the panel. I went through all the troubleshooting steps recommended. Had 12 volts at the control panel, but no connection to ground. Checked the I/O unit below and still had no indication of ground on the correct pins. Ground connections looked good. Unit started working afterwards but failed again with the jacks down and I had to manually open the valves to get the jacks up.

I took all the grounds connections loose under the RV, cleaned them up with a wire brush and coated everything with NO-OX grease to prevent corrosion. Everything is working fine now.

Mike