Sprinter In Dash Radio

[SSTraveler]

Originally Posted by 71_340

I also would like to upgrade my stereo (Winnebago installed Jensen unit) but want to retain my side view cameras. How did you connect three cameras to your Kenwood. The manual for that model shows two inputs.

Thank you.

If your Winnebago and Jensen supported 3 cameras before then you just use the same video cable into one port on the Kenwood, because they probably also used a Connex switch module like my Unity does. I don't know where your module is but mine is under the passenger seat. You might be able to find a wiring diagram here, http://www.winnebagoind.com/diagram/Wiring.htm. I have a Leisure Unity that came with a Kenwood Exelon head unit and Leisure used a Connex 3 camera switch module, http://www.rvcams.com/p/15/CVS150-01.html. I don't know how it is wired other than the video feed from the Kenwood. I know Class As use this module as well. Search the entire forum to see threads for those. You might want to look at these threads, https://sprinter-source.com/forum/sh...ghlight=Connex, https://sprinter-source.com/forum/sh...ghlight=Connex, https://sprinter-source.com/forum/sh...ghlight=Connex, https://www.winnieowners.com/forums/...-275498-2.html.

[71_340]

Unfortunately my setup is different, the OEM installed Jensen unit has three dedicated camera inputs and a plug in connector for the trigger wires on the back of the unit.


I will go to a stereo shop and ask them what they offer as a solution. I usually do all my stereo installs myself but probably not in this case. Thank you for all your input.