Palazzo Sanitize Water System Valve
In an attempt to sanitize the fresh water system on my Palazzo 35.1 I selected sanitize/winterize on the water control valve and tried to add the chlorine solution to the fresh water tank. Instead, the solution goes into the pressurized lines which supply faucets. What should happen is the solution should go into the 90 gallon fresh water tank to properly mix and then this could be circulated through the faucets. A call to Thor confirmed that my Palazzo is behaving as designed and that I must add the chlorine solution to the water hose and select city fill on the valve. This would mean trying to get 6 gallons of diluted solution through the supply hose if one follows the manuals procedure. Or, maybe one should just put undiluted Chlorox into the water hose to get flushed into the water tank (which is against the manuals recommendation)? Has anyone else noticed that the sanitize/winterize position does not suck fluid into the 90 gallon water tank?
__________________
Mike & Sue Jones
2020 Tuscany 45MJ
Jeep Gladiator
|