Another fence post guy here. It's mounted on top of the metal sewer tube. There are 3/8 rubber spacers between the metal and the plastic post--and the post is bolted to the metal in the corners of the post and metal sewer holder.
If you buy a corner vinyl post, it will have openings to use for the fence rails-they can be placed to provide air circulation. One end has a cap screwed on and the other has a cap that is held with two pins.
The tube is big enough to store 3 sections of hose, the sewer drain connection, and rubber gloves.
The metal tube carries two other sections of drain hose for emergency.
The fence post is white and blends in nicely with the ORV body.
I need to do this. My Rhino hose just barely fits inside my bumper diameter wise and hard to pull out. Your fence post is attached to the bumper right?
__________________
2020 Arctic Fox 29-5K
2021 Ram 3500 DRW Cummins HO Aisin
2019 ORV 24RLS Titanium (Sold)
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I also used the 5 inch fence post on my trailer. Used one section of plastic gutter as a slide and put my sewer hose and fitting in that. Will have to add pictures of it mounted but these are after I finished getting the caps worked out. Mounted it with 1 inch metal straps bent around the square post and then drilled into the frame and used small nuts and bolts to hold it to the frame.
Quick note here---I used the shop grinder to shave off some of the plastic knobs on the sewer hose connectors. Just enough to squeeze the hose and connectors into the metal hose holder that comes with ORV.
Hope this helps...............
Quick note here---I used the shop grinder to shave off some of the plastic knobs on the sewer hose connectors. Just enough to squeeze the hose and connectors into the metal hose holder that comes with ORV.
Hope this helps...............
Best option yet.
__________________
2020 Arctic Fox 29-5K
2021 Ram 3500 DRW Cummins HO Aisin
2019 ORV 24RLS Titanium (Sold)
I screwed one of these flanges right to the frame near the dump valves. I put the 90 deg. elbow on this for storage and it is there as soon as I kneel down to snap the hose onto the dump. This way the Rino fits in the bumper and I have no bagss or anything that need to keep away from "clean stuff". Works good for me.
they fit in the stock 4" bumper storage, you just need to twist the "fins" to fit in the corners. I have two 10ft in mine. Yes the elbow goes into a plastic coffee container, sits inside to drain if there's any moisture left.
I screwed one of these flanges right to the frame near the dump valves. I put the 90 deg. elbow on this for storage and it is there as soon as I kneel down to snap the hose onto the dump. This way the Rino fits in the bumper and I have no bagss or anything that need to keep away from "clean stuff". Works good for me.