RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Outdoors RV Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Thread Tools Search this Thread Display Modes
Old 09-19-2020, 09:27 AM   #1
Lowriders's Avatar
Outdoors RV Owners Club
Join Date: Jan 2019
Location: Meadow Vista CA
Posts: 52
Extend rail

I have a 25rds titanium. I am trying to install a stromberg extended handrail. The holes do not line up with the existing ones of course. I was wondering if anyone knows how wide is the interior frame from the rear door trim. The hole pattern might be too wide and miss the frame member. Then I would be drilling into foam? If so, would I then have to drill all the way through to the interior and put large washers or a metal plate on the inside to support the rail? While that wouldnít be attractive, the safety the extended handrail offers is important to us. Thanks in advance for your thoughts.
Too Blessed to be Stressed
2019 ORV 25rds Titanium, tundra limited
Retired RN/medic/firefighter, wife retired RN
Lowriders is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-19-2020, 11:24 AM   #2
Senior Member
Brad Wilf's Avatar
Outdoors RV Owners Club
Join Date: Sep 2018
Location: Mission BC
Posts: 606
Email ORV they can send you wall build dimension sheet... did it for me.
2018 Black Rock 24kts, 300 watts Solar, 4-230ah gc2ís
2008 Dodge 3500 4x4, 6.7 Cummins, full delete, 6 spd man. Firestone bags.
Brad Wilf is offline   Reply With Quote
Old 09-19-2020, 02:52 PM   #3
Senior Member
Join Date: Sep 2016
Location: Monrovia, CA
Posts: 177
You could put a wood plate on the inside and stain it to match the caninetry, not that I'm trying to make more work for you. [wink-wink]

If you do be sure to squirt a liberal amount of window/door sealant into the holes!
2020 ORV 21RWS
2016 F150 Lariat FX4 Ecoboost shortbed
Gammel is offline   Reply With Quote
Old 09-20-2020, 11:58 AM   #4
Senior Member
Tuquala's Avatar
Outdoors RV Owners Club
Join Date: Jun 2015
Location: Kennewick, WA
Posts: 923
Looking at 2 PDFs I have for the door side wall (early and late builds), there is a 1-1/2 X 2-1/2 - 30" long alum tube inside wall welded to the door frame on the handle side. The bottom of the reinforcement is aboot 17" above the lower frame stringer. So it should start 17" above the bottom of the black skirt trim (at top of skirt!) and end 47" above the same, approx measurements.!!!!! The 2-1/2' measurement should be front to back since the walls are just aboot 2' thick. Hope that helps.
2016 Timber Ridge 280RKS
2003 Excursion XLT V10 4:30 Axles
DualCam HP 450W Roof Solar/320W Portable
Tuquala is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hand rail gonzo Monaco Owner's Forum 7 02-10-2009 11:28 AM
Rear spring wrap pin cutting into frame rail? Jimco Workhorse and Chevrolet Chassis Motorhome Forum 4 12-02-2008 12:11 PM
floor bulge from slide out rail untyed MH-General Discussions & Problems 7 10-31-2007 06:18 PM
Fuel Rail Pulse Damper Retainer Clip rvskipper Workhorse and Chevrolet Chassis Motorhome Forum 3 09-10-2006 02:47 PM

All times are GMT -6. The time now is 03:12 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.