I have a 2022 27TRX Trail on order.
I am looking for the height measurement from the top of the coupler to the ground with the trailer sitting level.
I also need to know the distance from the front of the coupler to where the front of the jack is.
I am going to put a topper on the RAM with double doors and need to make sure that they are not going to hit anything.
If anyone can help I would appreciate it greatly.
Thank you.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Thats a tough question. My tailgate hits my hitch
So i have to put a boat cusion there. French doors
On a contracter cap may or may not open. Depending on the hitch to truck angle at the time
You try to open them. If you have the cap installed
Already i would ask your dealer if you could test
It on one of their in stock models.. i think the trx
Is pretty tall. Maybe even more than my backcountry series.
Thompson RV in Pendelton Oregon sells more than anyone and they are only 50 miles from the factory. They are very nice and helpful. If anyone has the answers it would be them.
Assuming that all ORV's use the same coupler and jack it's 6" from the face of the jack to the front edge of the coupler. Thats measuring from the face of the jack light to the lip on the front edge of the coupler. The round tube part of the jack is 10-1/4" to the lip on the coupler.