I also had an RV park neighbor confirm my a/c on our 2015 Wind River 250RLSW was too noisy. It is the Coleman Mach 8. Just ordered the Fan Kit and look forward to it not being a further bother to us or to others.
And MAJOR kudos for the videos. The one on the insulation inside confirmed we had a problem too, as the insulation board had dislodged at the top, allowing most of the cooled air to recycle into the return air. Once repositioned and duct taped, the a/c now has more airflow through the registers.
Cheers
Fan blade Install went well and is much better now. In Alabama now so will use the A/C lots. Thanks again for the video.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Ok, here is the video. Please excuse the low audio in the beginning where I'm explaining how to replace the fan. I had the cover on the goPro and forgot to remove it. I did remove the cover for the important part where you get to hear before and after. The result is a substantial reduction in dB and a pitch change.
Video: (If you choose the youtube link in the video menu bar it will be much larger video and easier to see what I'm doing)
" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350">
Thanks for video, we changed out fan blade today. Took longer to order than to install. Probably silly question, but does AC work when slides are in (travel position). With slides in, our AC goes on for a few minutes then shuts off. Seems logical that slides need to be out, but just checking.
Thanks for video, we changed out fan blade today. Took longer to order than to install. Probably silly question, but does AC work when slides are in (travel position). With slides in, our AC goes on for a few minutes then shuts off. Seems logical that slides need to be out, but just checking.
A/C works either way. I have been running mine with the slides in. You just have less square footage to cool with the slides in so it stands to reason it would run less often.
Linear Mode
