I have a 2003 26 Vision on the Ford V10 chassis. I think its time to replace the shocks (reducing sway is probably my No. 1 priority). I'm looking for advice as to which replacement shocks I should get. Thanks.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I got my Bilstein's from "Shock Warehouse" and installed them myself.
Not a big deal. Rides like glass now.
Mike in Colorado
__________________
2004 Fleetwood Pace Arrow 37c, 8.1 gasser, (Jezebel) Ultra RV ECM / TCM and rear track bar, PPE deep Tx pan, Bilstein's, Sailun's & Sumo's all round, pushed by a 2002 Grand Caravan, on a Master Tow Dolly.
I have bought several sets of shocks from shock warehouse and found them to be good to deal with. Can you guys help me with some part numbers? Or at least what info I might need to order them? Thanks, Don.
Can anybody help me with part numbers for the shocks? How about what chassis I would have under a 2003 26 Vision? Or, some other way to figure out what to order? Thanks, Don.
We are totally non-mechanical but changed ours out ourself front and back (was hard to get rears on but did it with right tools)
We are also in Canada so used a local company to source ours who were really helpful. Provided them with our VIN number and took photos of the label inside the rig detailing the vehicle and also took photos of the existing cheap OEM shocks and measurements. They ordered them from the emailed info, and within a few days we were good to go. Made quite a difference to our ride for sure.
For what it's worth different shocks have different connector areas we found.
Sorry not sure how helpful this is to you but like I said we are not mechanical at all but find when we provide enough info the suppliers overall have been very helpful and we've done a lot of self maintenance/repair over the years.
Finally got somebody on the phone at shock warehouse. The guy knew just what was needed when I told him what chassis I have. Koni's are 50% more money and not worth it compared to Bilstein's. Thanks All, for your help.
Linear Mode
