iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
There may or may not be one-- have you confirmed that you DO have one?
If so a good place to start is where shore power comes in. It WILL lead to the ATS if you have one. As will the wiring from the generator prep location.
Look where the cord enters the rig. There should be a female 30 amp 120 volt plug. In your generator compartment is a covered electric box. The genny is wired to the box and the shore cable male is just plugged into the female outlet.
Linear Mode
