Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Truck Camper Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Thread Tools Search this Thread Display Modes
Old 09-11-2021, 11:09 AM   #1
Junior Member
Join Date: May 2020
Posts: 2
Question Cab over lader replace

Need to replace my exterior ladder on a northern lite 10 .2 . Manufacture says that ladder no longer made . How hard will it be to get a universal to replace , any suggestions would be appreciated
johnlentz is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-17-2021, 10:26 PM   #2
Junior Member
kames's Avatar
Join Date: Jan 2021
Posts: 20
I bought one of these Surco 502L ladders to use for a different project.
It comes with two pairs of middle supports that do not have mounting holes drilled in the ladder yet, so you can drill them yourself to match the locations of your original mounts. It comes in three pieces so there are options if you need to saw it shorter or otherwise modify it. I cut half the top loops off mine so I could mount it to the face of my trailer. The ladder uprights are 11 inches center to center where you would bolt through them, so measure your old one. It's 12 inches from the outside edge of the left upright to the outside edge of the right, with 1 inch aluminum tubes. Looking at a picture of a Northern Lite 10.2 I think you could make it work.
kames is offline   Reply With Quote

ace, replace

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rubber roof wrap over cab over or tuck in? meaty Class C Motorhome Discussions 6 06-04-2018 10:45 AM
Why No Class C's on Cab-Over-Engine Cab/Chassis? Scarab0088 Class C Motorhome Discussions 4 09-10-2017 01:23 PM
2003 winnebago minnie winnie leak over cab jasonrandall MH-General Discussions & Problems 5 11-29-2007 03:30 AM
Cab Over Rebuild 1997 Minnie Winnie bec507 Class C Motorhome Discussions 3 05-02-2007 08:38 AM
Crew cab or Ext cab. diandtom Trailer Towing and Tow Vehicles Discussion 12 06-27-2006 01:02 PM

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 03:23 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.