Community Forums

wtfullers · 07-24-2022, 04:12 PM

First post here - so apologize for any Faux Pas or breach of etiquette.

I have an Eagle Cap 1200 and the LED over the captains chairs is "out" (aka, doesn't light up). I assume it's a relatively easy fix, but I can't remove the cover. The fixture is mounted on the ceiling, is round, white cover with push button on/off switch in the middle of the fixture. The fixture cover can be turned, but that doesn't seem to remove the fixture. Does anyone have any experience removing such a fixture cover? Does it just pull off? Appreciate any thoughts or ideas.

Bill Fuller

Offfishn · 07-24-2022, 04:20 PM

If you can find someone with a camera on their phone, maybe they could upload a picture for you.

wtfullers · 07-24-2022, 10:19 PM

Thanks for the response. Yeah, pictures would likely help. Hopefully I have successfully attached 2 pictures. One is fixture (and cover) where light is working, the other is where light is not working.

Offfishn · 07-25-2022, 06:38 AM

Those are different cover then my round LED's which "pop-off" the base with a little help.
Have you called Eagle?

wtfullers · 07-25-2022, 11:31 AM

I have posted similar query on the Eagle Cap site and message board. I've not observed anywhere near the response level on that board as I have here (just in watching and reading many posts over the past several months).

PowerEng · 08-11-2022, 06:55 PM

I have the same problem in my 1165.

The light covers do just pop off. I am replacing them with these, as I am tired with fiddling with the factory installed ones trying to get them to stay on.

https://www.amazon.ca/PEAKTOW-PTR000...ef_=ast_sto_dp

wtfullers · 08-12-2022, 03:51 PM

Thanks greatly for the response. I've not tried to just "pop" off the covers, s your update reduces the anxiety.

Like your replacements as well. Thanks for the tip.

Bill