|
01-29-2014, 04:09 PM
|
#1
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Mar 2013
Posts: 466
|
Wheel covers
My white wheel covers keep coming off at highway speeds. Should I use the bungee cords that came with them to fix that?
__________________
2008 Fleetwood Southwind
W22 Workhorse Chassis 8.1L Chev Vortec
Allison 1000 transmission
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-29-2014, 04:10 PM
|
#2
|
Senior Member
Join Date: Mar 2007
Location: Virginia
Posts: 807
|
You may want to add some super Velcro as well.
__________________
**********
2022 Gulf Stream Envision 21QBS pulled by a 2021 Jeep Gladiator Mojave
|
|
|
01-29-2014, 04:17 PM
|
#3
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Mar 2013
Posts: 466
|
Velcro shortage
I hear the critters they use for velcro are on the endangered list! What next!
__________________
2008 Fleetwood Southwind
W22 Workhorse Chassis 8.1L Chev Vortec
Allison 1000 transmission
|
|
|
01-29-2014, 04:24 PM
|
#4
|
Senior Member
Fleetwood Owners Club
Join Date: May 2011
Location: summer-Cuba Mo./winter Somewhere in South TX.
Posts: 480
|
Can U just nail them on? Use rubber sealant on the nail heads b/4 you put them in the tires. Eddie Elk.
__________________
1998 Pace Arrow Vision 36' w/460, '03 Honda CRV, FMCA #388823, Gateway Getaways RV Club
|
|
|
01-29-2014, 04:25 PM
|
#5
|
Senior Member
Join Date: Sep 2013
Location: Norfleet, Florida
Posts: 188
|
Yep, kinda like the way Ultra-leather replaced Naugahyde when the Naugas went extinct. ;-)
__________________
Dodge 2005 Grand Caravan - minicamper at times.
Ford 1988 E150 Action Conversion Van - camper conversion in progress.
Kawasaki 2005 KLR-650 - excursion vehicle.
|
|
|
01-29-2014, 04:45 PM
|
#6
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Mar 2013
Posts: 466
|
Sealant on the nail heads
Yes were gettin' close I think!
__________________
2008 Fleetwood Southwind
W22 Workhorse Chassis 8.1L Chev Vortec
Allison 1000 transmission
|
|
|
01-29-2014, 04:48 PM
|
#7
|
Senior Member
Gulf Streamers Club
Join Date: Jan 2012
Location: Cincinnati
Posts: 19,925
|
If you just painted the sidewalls white you wouldn't need wheel covers.
__________________
Bob & Donna
'98 Gulf Stream Sun Voyager DP being pushed by a '00 Beetle TDI
|
|
|
01-29-2014, 05:21 PM
|
#8
|
Registered User
Damon Owners Club Workhorse Chassis Owner
Join Date: May 2008
Location: N. Palm Springs CA (in winter)
Posts: 2,420
|
Have you considered spinners?
|
|
|
01-29-2014, 05:43 PM
|
#9
|
Senior Member
Join Date: Feb 2010
Posts: 4,654
|
Just get some that as seen on tv rubber in a rattle can in white and make white walls...
__________________
Tony & Lori
1989 Country Coach Savannah SE
|
|
|
01-29-2014, 06:59 PM
|
#10
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Mar 2013
Posts: 466
|
I'm going with the nails folks. Good UV protection and minimum flapping at cruising speeds I'm guessing. Thx Eddie Elk
__________________
2008 Fleetwood Southwind
W22 Workhorse Chassis 8.1L Chev Vortec
Allison 1000 transmission
|
|
|
01-29-2014, 07:11 PM
|
#11
|
Senior Member
Fleetwood Owners Club
Join Date: Jan 2010
Posts: 1,391
|
Might want to reconsider and use self taping screws. Won't pull out as easy.
|
|
|
01-29-2014, 08:28 PM
|
#12
|
Senior Member
Solo Rvers Club iRV2 No Limits Club
Join Date: Feb 2011
Location: Yuma County, AZ
Posts: 10,869
|
I thought you might have better with luck rubber cement on the inside of the cover and 1/2” staples every 2” inches around the outside edges.
__________________
Barb (RVM18) with Morkies Lily & Bebe RIP Sena FMCA#F466348
"Homer" ‘11 Shasta Cynara, pulling "Ranger" '97 Ford Ranger toad
The Journey is Our Destination. Full-timer May 2011 - July 2021
[SIGPIC][/SIGPIC]
|
|
|
01-29-2014, 10:51 PM
|
#13
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Mar 2013
Posts: 466
|
Hmmm
Now you got me thinkin'
Quote:
Originally Posted by okmunky
I thought you might have better with luck rubber cement on the inside of the cover and 1/2” staples every 2” inches around the outside edges.
|
__________________
2008 Fleetwood Southwind
W22 Workhorse Chassis 8.1L Chev Vortec
Allison 1000 transmission
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 09:50 PM.