bedroom slide

[charlie 62]

Have a Forrest River Crusader 270 RET. The bedroom slide comes out about 2 inches (front side) and the rear side about 4 inches and the slide stops. If a big battery charger is attached (60 amp) it will move. Any ideas?

[jesilvas]

Converter is not charging the battery and the battery is dead. This is a 12V system.

[charlie 62]

The other two slides work normal. Not the battery.

[Midmug87]

I just had same problem n it cost $75 for a two min fix. All mine needed was under neath slide the guy turned nut three times counter clockwise and the whole slide evened out and fell into place.

[jesilvas]

Originally Posted by charlie 62

The other two slides work normal. Not the battery.

I was reading it as two different slides. I see now the bed slide is 2" out of square. Depends on your system. Could be gears skipped, out of level, to name a couple.

[clyon51]

Originally Posted by charlie 62

Have a Forrest River Crusader 270 RET. The bedroom slide comes out about 2 inches (front side) and the rear side about 4 inches and the slide stops. If a big battery charger is attached (60 amp) it will move. Any ideas?

It's out of square and in a bind. If it's gear driven in 2 places, one has jumped a few teeth.

[charlie 62]

thanx to all-I will check squareness