Could be an easy fix. The cables are held in place with an Allen style set screw. Sometimes these can become loose and allow the cable to pull out.
One method to access the valve body is to cut a 3-sided hinged panel, hinged to the front of the rig, check the set screw.
Once done, tape up the access panel with Gorilla tape.
Use an inspection camera to find the valve body before cutting open the panel.
__________________
2018 Road Warrior 427
2013 Can Am Spyder RT Limited
2017 Ram 3500 w/Aisin w/4:10
2 Dachshunds DJ (RIP 9-12-19) & Joey (RIP 5-14-21)
|