Change of Plans

[Tdave]

Originally Posted by RoadEyePie

Mine has the Equa-Flex system which has 5 zerk fittings on it. One at the top where the Equa-Flex mounts to the frame. One at each end of the front and rear springs and one on each side where the shackle links attach to the Equa-Flex. So where do these Wet-Bolts go?

In the last two pivot places: where the other end of the springs attached to the frame shackles.

In the photo you posted it looks to be those "outer" shackles. No grease fittings on those bolts?

You should have seven grease fittings per side.

[RoadEyePie]

Originally Posted by Tdave

In the last two pivot places: where the other end of the springs attached to the frame shackles.

In the photo you posted it looks to be those "outer" shackles. No grease fittings on those bolts?

You should have seven grease fittings per side.

I've opened a new thread based on Lippert's authorization for replacing all 4 springs, u-bolts, and shackles. We'll continue there. But to answer your question, the zerk fitting on the hanger bolt end of the springs have been filed or rubbed off. I'll have to replace the zerk fittings when I replace the springs.

[LAKnox]

Originally Posted by txcpl

A good trailer shop can remedy your problem fairly quickly.

What I was thinking...

Lyle

[RoadEyePie]

Well here I am in Benson, AZ. Drove 4 days through Texas along I-20 and I-10. Got to Van Horn, TX last night and it got down to 20 degrees. Wednesday we go to our final destination in Mesa, AZ.