I can't get sound from my cable channels to play though my iRV Stero system in my Arctic Fox. CDs & DVDs, no problem. Was hoping to watch football with the surround sound. Set the stero to TV Audio but get nothing. Checked the speaker zones & no problem there. Ran through all the other mode options - still nothing (FM played but that was it). CDs & DVDs play through HDMI 2.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Check that the TV audio output is connected to the stereo system. Also make sure the stereo system is set to input the TV audio and pass it on to the speakers.
Better answers might be possible if you specify make, models of the components you're dealing with.
__________________
Bob & Donna
'98 Gulf Stream Sun Voyager DP being pushed by a '00 Beetle TDI
You'll need to pull your stereo unit, plug an optical cable to the back of your television, channel it down the hole and connect it to the back of the stereo unit. If you check the Northwood website (NROA2003), there are several write ups on how to do this. It's not tough to do.
Linear Mode
