|
10-09-2006, 02:03 AM
|
#1
|
Member
Join Date: Apr 2006
Location: Wind Lake, WI
Posts: 79
|
Been reading lots of info on lubricating slides, but there still seems to be some disagreement as to what's best. Any ideas? Thanks.
__________________
2005 Mountaineer 298RLS & 2003 Chevrolet Silverado Crew Cab 2500HD Duramax/Allison
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-09-2006, 02:03 AM
|
#2
|
Member
Join Date: Apr 2006
Location: Wind Lake, WI
Posts: 79
|
Been reading lots of info on lubricating slides, but there still seems to be some disagreement as to what's best. Any ideas? Thanks.
__________________
2005 Mountaineer 298RLS & 2003 Chevrolet Silverado Crew Cab 2500HD Duramax/Allison
|
|
|
10-09-2006, 03:25 AM
|
#3
|
Senior Member
Join Date: May 2005
Location: Carlos, Texas
Posts: 1,746
|
I just get a can of slide lube. It's a dry lube that dosen't let dirt stick to things. In the camping section.
|
|
|
10-10-2006, 03:43 AM
|
#4
|
Senior Member
Join Date: Apr 2006
Location: Marietta, GA
Posts: 327
|
Same here(slide lube). It's silicone based, not oily, so it doesn't attract road grime and dirt.
__________________
'00 Monaco Dip 38D
8.3L Cummins ISC
|
|
|
10-10-2006, 08:52 PM
|
#5
|
Senior Member
Join Date: May 2003
Location: Boerne, TX
Posts: 527
|
Does it have to be "slide lube", or will any silicone dry lube work?
__________________
2005 F-250 XLT 4X4 V-10
2006 Wildcat 31QBH
|
|
|
10-13-2006, 03:31 AM
|
#6
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,982
|
I use a molybdenum spray. The carrier evaporates, leaving a completely dry lubricating film. The only restriction is to avoid the use of anything that leaves a sticky film type product. Grease/oil/WD40 etc leave a film that attracts/holds dirt and road sand. The two combined are a crude grinding compound.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
10-28-2006, 06:49 AM
|
#7
|
Junior Member
Join Date: Oct 2006
Posts: 7
|
What type of slides do you all have? THere is a difference between hydraulic and cable. Where exactly are you lubricating the slide. Thanks, from a 1st time slide-out user.
|
|
|
10-28-2006, 03:01 PM
|
#8
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
sccamping welcome to irv2
If I see some rubbing on slide supports like shiney metal I would lube that area. A good polish job to side walls of slide so slide doesn't bind on rubber seals helps also.
|
|
|
10-28-2006, 06:19 PM
|
#9
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,982
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by sccamping:
What type of slides do you all have? THere is a difference between hydraulic and cable. Where exactly are you lubricating the slide. Thanks, from a 1st time slide-out user. </div></BLOCKQUOTE>
I've had both. The slide mechanism is lubed the same way. I lightly coat all sliding,geared surfaces with molybdenum (dry moly) spray. This spray dries quickly to a metallic black color, which helps to indicate when a re-application is needed. See a bare spot and re-coat. The down side is, get it on anything and it must wear off.
The slide-out seals are a different topic. First is a wipe-down with a damp cloth to remove dirt/dust, then I use "rubber-lube" spray on them. It's a silicone-based product.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
10-30-2006, 04:25 AM
|
#10
|
Junior Member
Join Date: Oct 2006
Posts: 7
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Picture of Ray,IN
Posted October 13, 2006 09:31 AM Hide Post
I use a molybdenum spray. The carrier evaporates, leaving a completely dry lubricating film. The only restriction is to avoid the use of anything that leaves a sticky film type product. Grease/oil/WD40 etc leave a film that attracts/holds dirt and road sand. The two combined are a crude grinding compound.
Remain laidback and unruffled, camping is great!
Army, 11B5MX, retired
2005 Grand Junction 35TMS
2002 Chevrolet K3500,CC,LB,black,Blacked out lighting, limo tint, shaved. </div></BLOCKQUOTE>
|
|
|
10-30-2006, 04:27 AM
|
#11
|
Junior Member
Join Date: Oct 2006
Posts: 7
|
Thank you very much for this info. It's probably saved our slide as we haven't done a thing to it.
|
|
|
12-17-2006, 09:49 AM
|
#12
|
Junior Member
Join Date: Dec 2006
Posts: 4
|
HI
I have been using a chain lube which drys dry.
with no problem and at 1/3 the price.
Jayco 36 RLTS
2500 HD..
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|