Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > 5th Wheel Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-17-2025, 11:43 PM   #1
Junior Member
 
Join Date: Jan 2025
Posts: 2
Morryde ISO Parts

Hello,


I am a full time RVer and hit some huge potholes heading to Galveston. I want to have my Morryde IS checked for alignment and bearing packed. To be sure I don't have problems I would like to get bearing and shims before I take it in to the repair shop. I cant find any info on the Morryde site for parts. Does anyone have a suggestion where I can get these parts.


Thanks.
t j h is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-18-2025, 07:15 AM   #2
Senior Member
 
Join Date: Dec 2006
Location: Foxboro Ma.
Posts: 1,167
https://www.morryde.com/wp-content/u...rs-UPDATED.pdf


most commercial truck and trailer alignment shops should be able to check to see if your still strait.

The rubber blocks on the IS can have minor cracks don't be alarmed if you find small cracks that are within Morryde specs.

From what I have seen on ours small cracks started showing up around 4 years old on the rubber. Not any thing out of spec so far at 6 years old .

__________________
2015 42' Redwood RL38 Morryde IS , disk brakes, 1920W of solar with Victron everything,5 Battleborn, 2024 GMC DRW 3500HD ,60 gallons of fuel in the bed,Hensley BD5 air ride hitch 17.5" tire upgrade
xc-mark is offline   Reply With Quote
Old 01-18-2025, 07:34 AM   #3
Community Moderator


 
Join Date: Aug 2018
Location: Full timing
Posts: 7,965
Quote:
Originally Posted by t j h View Post
Hello,


I am a full time RVer and hit some huge potholes heading to Galveston. I want to have my Morryde IS checked for alignment and bearing packed. To be sure I don't have problems I would like to get bearing and shims before I take it in to the repair shop. I cant find any info on the Morryde site for parts. Does anyone have a suggestion where I can get these parts.


Thanks.
Bearings and seals, I got from O'Reilly's. You can get the parts from any auto parts store. Disc brakes part as well.

The shims, you have no ideal about which one you would need to add/remove from the system. For a double axel rig, you would need at least 4 of each shim to be prepared for what you may encounter, then what are you going to do with the parts you do not use? I would not worry about the shims, you just don't know what you will need.

An authorized repair center for the IS System will have the parts on hand or be able to get just what is needed. We had a major issue 6 weeks after install in 2020, the Buckeye, Az. repair center had all the shims needed for the system.
__________________
2018 Road Warrior 427
2013 Can Am Spyder RT Limited
2017 Ram 3500 w/Aisin w/4:10
2 Dachshunds DJ (RIP 9-12-19) & Joey (RIP 5-14-21)
hamm2018 is offline   Reply With Quote
Old 01-20-2025, 12:41 PM   #4
Junior Member
 
Join Date: Nov 2024
Posts: 3
I would try calling MORryde, talk to Lindsey Yoder she schedules service appointments but I’m sure she could get you in touch with someone to help you with parts.
Her number is 574-293-1581 extension 1253
Hope this gets you what you’re looking for.
Dan
Dapper Dan is offline   Reply With Quote
Old 01-21-2025, 01:17 PM   #5
Junior Member
 
Join Date: Jan 2025
Posts: 2
I want to thank everyone who sent suggestions. I secured the parts from MorRyde. The largest challenge was finding a reputable service center with the proper equipment to do alignments. Several wanted to do the alignment in there driveway. I don’t think so.
Thanks
TJH
t j h is offline   Reply With Quote
Old 01-25-2025, 07:32 AM   #6
Senior Member
 
Join Date: Dec 2006
Location: Foxboro Ma.
Posts: 1,167
its not odd for trailer shop to work outside, the equipment to get you running strait isn't all that big of a deal to move around. just need some place flat without wind.
__________________
2015 42' Redwood RL38 Morryde IS , disk brakes, 1920W of solar with Victron everything,5 Battleborn, 2024 GMC DRW 3500HD ,60 gallons of fuel in the bed,Hensley BD5 air ride hitch 17.5" tire upgrade
xc-mark is offline   Reply With Quote
Old 01-25-2025, 07:41 AM   #7
Community Moderator


 
Join Date: Aug 2018
Location: Full timing
Posts: 7,965
Quote:
Originally Posted by t j h View Post
I want to thank everyone who sent suggestions. I secured the parts from MorRyde. The largest challenge was finding a reputable service center with the proper equipment to do alignments. Several wanted to do the alignment in there driveway. I don’t think so.
Thanks
TJH
What is wrong with doing it in the driveway area? Our has been done that way 2 times since October 2020.
__________________
2018 Road Warrior 427
2013 Can Am Spyder RT Limited
2017 Ram 3500 w/Aisin w/4:10
2 Dachshunds DJ (RIP 9-12-19) & Joey (RIP 5-14-21)
hamm2018 is offline   Reply With Quote
Old 02-12-2025, 01:24 PM   #8
Senior Member
 
Join Date: Mar 2009
Posts: 263
Is a hard to find a shop to do aligment on IS.I try 2 of them and I end up to Moryde in Indiana to do it.
buc1908 is offline   Reply With Quote
Old 02-12-2025, 02:49 PM   #9
Junior Member
 
Join Date: Nov 2024
Posts: 3
Residing in southeastern Wisconsin it’s fairly easy for us to travel to Elkhart and have alignments done right at MORryde. The plus is IF they spot issues with other components, they have all the parts at the ready for quick replacement!!
We take our trailer in about every 3 years and let the experts take care of alignments and whatever else may need attention! No roadside problems that way!

Dan
Dapper Dan is offline   Reply With Quote
Old 02-13-2025, 07:37 AM   #10
Community Moderator


 
Join Date: Aug 2018
Location: Full timing
Posts: 7,965
We are going into MorRyde in early August for inspection and alignment.
__________________
2018 Road Warrior 427
2013 Can Am Spyder RT Limited
2017 Ram 3500 w/Aisin w/4:10
2 Dachshunds DJ (RIP 9-12-19) & Joey (RIP 5-14-21)
hamm2018 is offline   Reply With Quote
Reply

Tags
parts



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ISO Norcold 6162 parts hrblues RV Systems & Appliances 2 06-17-2023 11:44 AM
Parts Parts Parts NJ MiniGP RV Systems & Appliances 4 08-01-2016 09:42 PM
Spartan Chassis Earns ISO 9001 Recertification DriVer RV Industry Press 0 03-26-2013 03:28 PM
ISO relay Continous Buzzing vettehead Class A Motorhome Discussions 3 02-05-2012 07:49 AM
AW Hydraulic Oil ISO 46 ?? Jay W Spartan Motorhome Chassis Forum 4 08-12-2008 06:45 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 03:29 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2025, vBulletin Solutions, Inc.