Slide switch

[adjuster11]

I have a 2004 Laredo 27RL, that my slide activator switch quit.

I did some googling, most of the responses says there is nothing printed or written on it, to indicate what to buy.

Has anyone else been through this, and can shed some light on which switch I need to order.

Thanks in advance.

[Old-Biscuit]

Pull your switch/check number of terminals---wiring then match

https://www.bing.com/images/search?q...IQFRML&first=1

[Toby Dog]

Have you verified that it's the switch and not the motor?

[Bertrrr]

Swap it out with one of the other ones you know works , this will tell you if it's the switch or , connection or motor

[adjuster11]

Switch acts like it's jammed, like something fell down inside the rocker, and it won't rock, to the "in" direction.

I'll need to pull it out so I know what I have.

I looked for specific instructions to manually wind in the slide, and got a choice of about 4 locations of the motor, including one where you have to take the belly pan off.

If anyone knows where the motor resides in this slide, I'd appreciate your input.

[Old-Biscuit]

Originally Posted by adjuster11

Switch acts like it's jammed, like something fell down inside the rocker, and it won't rock, to the "in" direction.

I'll need to pull it out so I know what I have.

I looked for specific instructions to manually wind in the slide, and got a choice of about 4 locations of the motor, including one where you have to take the belly pan off.

If anyone knows where the motor resides in this slide, I'd appreciate your input.

Pull the switch and 'short' the wires to electrically operate slide