|
|
06-28-2014, 06:30 AM
|
#1
|
Junior Member
Join Date: Feb 2014
Posts: 18
|
Tire pressure of 5th wheel
What should tire pressure be on 2004 Cardinal Platnium 5th wheel. Heard 120 but that sounds high. Need confirmation.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-28-2014, 06:49 AM
|
#2
|
Senior Member
Join Date: Nov 2007
Location: NC
Posts: 578
|
What does the tire pressure on the tire side wall say??????? That's the pressure you use. The tire pressure is for the tire not the fifth wheel.
__________________
Wandering1
|
|
|
06-28-2014, 07:42 AM
|
#3
|
Senior Member
Join Date: Sep 2009
Posts: 1,536
|
The correct tire pressure can be found on the vehicle’s tire placard, vehicle’s certification label and in the vehicle owner’s manual.
FastEagle
|
|
|
06-28-2014, 09:48 AM
|
#4
|
Junior Member
Forest River Owners Club
Join Date: Nov 2013
Posts: 2
|
I have a placard on the driver's side of my Silverback that lists the tire size and the recommended tire pressure for my 5th wheel. The tire pressure and maximum load per tire is also listed on the tire sidewall.
|
|
|
06-28-2014, 10:05 AM
|
#5
|
Registered User
Join Date: Aug 2012
Location: The Land Of Oz RVM17
Posts: 1,592
|
I would run them at the max pressure that is on the sidewall, no matter what the MFG stickers says, unless you like changing blown out tires on the side of the road, and having you fenders and coach sides rebuilt!:
|
|
|
06-28-2014, 04:30 PM
|
#6
|
Member
Join Date: Jan 2013
Posts: 77
|
Quote:
Originally Posted by KSCRUDE
I would run them at the max pressure that is on the sidewall, no matter what the MFG stickers says, unless you like changing blown out tires on the side of the road, and having you fenders and coach sides rebuilt!:
|
X2 on this.
Then guy at the tire store told me this also. Tires run cooler inflated, you will never wear out the tires anyway so no worries about wear pattern.
__________________
06 Dodge QCLB Dually Cummins G56 B&W Companion 03 Sierra 27 RLSS
|
|
|
06-28-2014, 04:32 PM
|
#7
|
Senior Member
Join Date: Sep 2012
Posts: 4,232
|
Quote:
Originally Posted by FastEagle
The correct tire pressure can be found on the vehicle’s tire placard, vehicle’s certification label and in the vehicle owner’s manual.
FastEagle
|
Not unless the tires were changed to something different.
OP and everyone, look on EACH tire's sidewall. They may not even be all the same.
|
|
|
06-28-2014, 07:17 PM
|
#8
|
Senior Member
Join Date: May 2013
Posts: 381
|
If they are E rating, 80, PSI. G rating, 100 PSI. We towed our fiver over 40,000 miles over 8 years with no tire problems. Our E's were BF Goodrich. The G's were GY 614.
Sent from my iPad using iRV2 - RV Forum
|
|
|
06-28-2014, 09:10 PM
|
#9
|
Senior Member
Join Date: Jul 2001
Location: Wallkill NWR, NJ
Posts: 184
|
Quote:
Originally Posted by bailiff
If they are E rating, 80, PSI. G rating, 100 PSI. We towed our fiver over 40,000 miles over 8 years with no tire problems. Our E's were BF Goodrich. The G's were GY 614.
Sent from my iPad using iRV2 - RV Forum
|
I run my G6`14's at max 110psi per the manufactures placard.
__________________
'17' F350 6.7 CC King Ranch DRW 4x4 4:10s B&W 20 K Companion Hitch
'04' NuWa 33.5 RLTG DA Demco GlideRide pin box
|
|
|
06-29-2014, 06:01 AM
|
#10
|
Senior Member
Join Date: Oct 2012
Posts: 825
|
Whatever the advices are on 5th wheeler or tires, tires are often chanched to other specifications, so best is to determine it from 5th wheeler and tires specifications you now have.
From 5 th wheeler need to know GVWR and configuration ( number of axles and tires total on the ground when driving. Best would even be to weigh the 5th wheeler per wheel(pair).
From tires the maximum load and pressure needed for that , but best to give also the speedcode of tire or if they are ST ( special trailer ) tires.
This can be found on sidewall.
If you give all that , I will calculate a save advice pressure for the tires for fully loaded ,with some reserve but no bumping.
|
|
|
06-29-2014, 06:06 AM
|
#11
|
Senior Member
Join Date: Oct 2011
Posts: 1,312
|
Simple
E rated tires 80 psi
G rated tires 110 psi
In all my years of towing I have never seen a tire wear at center.
The edges always wear first.
I had success with LTs even with over inflation while ST tires were complete failures on same unit.
__________________
Barbara and Laurent, Hartland Big Country 3500RL. 39 ft long and 15500 GVW.
2005 Ford F250 SD, XL F250 4x4, Long Box, 6.0L Diesel, 6 Speed Stick, Hypertech Max Energy for Fuel mileage of 21 MPusG empty, 12.6 MPusG pulling the BC. ScangaugeII for display..
|
|
|
06-29-2014, 06:27 AM
|
#12
|
Senior Member
Join Date: Sep 2012
Posts: 4,232
|
I still check actual tire numbers because I have seen E range tires rated for 65PSI.
|
|
|
06-29-2014, 07:06 AM
|
#13
|
Senior Member
Join Date: Mar 2009
Posts: 1,597
|
Many, not all, tire manufactures of ST tires states you can run them at speeds over 65 if you add 10# air to max. Personally we won't run ST tires.
__________________
2003 Teton Grand Freedom. 2006 Freightliner Century 120 with Detroit 14L and Ultrashift.2016 Smartcar carry on deck. Full time going from job to job. Building and maintaining plants across the USA. Sold 2006 Mobile Suites 32TK3
|
|
|
06-29-2014, 12:18 PM
|
#14
|
Senior Member
Join Date: Jan 2013
Location: Maine
Posts: 165
|
The most accurate way to determine the tire pressure to use is to have each wheel weighed separately, and use the manufacturer's inflation guide. Use the heavier weight on each axle to determine the weight. Otherwise, use the sidewall pressure to be safe.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|