Originally Posted by Brownie1952
We ran anti freeze thru it when we prep it for winter. We open trailer today and flushed the water system. All went well unti we tried running the washer and there is no water coming in. Any suggestions as to why.thank you
1) Make sure you have water pressure and both valves are turned on.
2) Unplug the washer for a couple of minutes, (1-2)
3) Open the washer door and add about 1-1/2 gallons of water to the washer. Then run the rinse/spin cycle. The antifreeze foams when you try to drain the washer, (in water pump). This aeration triggers an internal fault code which prevents the washer fill valves from opening.