Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > TRAVEL TRAILER, 5th WHEEL & TRUCK CAMPER FORUMS > Trailer Towing and Tow Vehicles Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-03-2019, 10:06 AM   #1
Senior Member
 
Mike & Mike's Avatar
 
Alpine Owners Club
Winnebago Owners Club
Join Date: Oct 2005
Location: Home is between Salinas and Monterey, CA
Posts: 241
2017/2018 Ram 3500 cup holder inside diameter?

Hi all,

Sorry to bother you with such mundane stuff, but I want to buy a gift for someone with the Ram 3500: a Yeti 14 oz. coffee cup and a cup holder for the large 4" diameter cup. I found a wonderful cup holder that's adjustable from 3.0 to 3.75" and need to know if the Ram cup holder is within that range. I'm guessing that there is a cup holder on the center console?

Link to Etsy for this cupholder: https://www.etsy.com/listing/6722849..._click=1&frs=1

We did buy 2 of these for our Alpine motorhome and they work great and are made quite well.

Cheers,
__________________
Mike and Mike (Michele)
2017 Winnebago Tour 42HD
Previously: 2004 Alpine 34 FDDS
Mike & Mike is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-03-2019, 10:43 AM   #2
Senior Member
 
jimcumminsw's Avatar
 
Join Date: Dec 2010
Location: Oswego IL
Posts: 2,145
Will Ram has two different console that they offer depending on trim level. Now with that said, I have the SLT trim level. I have two RTIC drink coolers that fit in the standard cup holders on my 2008, Dodge/RAM Mega Cab. The first size is a 16OZ drinking vessel the other is a 24OZ vessel. The 16OZ fits in the smaller of the three cup holders by the Driver. The larger vessel 24OZ will fit in the larger cup holder that is next to the passenger side. The cup holder in front of the passenger side cup holder is the smaller size for the 16OZ cup.
Hope this helps and makes sense?
__________________
Jim & Jill
Sold: 2010 318SAB Cougar:New: 2016 Cedar Creek 34RL. 2008 Dodge 6.7LCummins the original 6.7L engine, w/68RFE Auto
jimcumminsw is offline   Reply With Quote
Old 03-04-2019, 07:36 AM   #3
Senior Member
 
Rhagfo's Avatar
 
Join Date: Aug 2013
Posts: 1,288
Ours is a Lariat with the center console and the cup is hole is 3-5/8" in diameter.
__________________
Russ & Paula, Portland, OR. The Beagle Belle.
2016 Ram Laramie 3500 DRW Aisin 4X4 14,000# GVWR.
2005 Keystone Copper Canyon 293FWSLS Rear Kitchen 12,360 GVWR
Rhagfo is offline   Reply With Quote
Old 03-04-2019, 08:00 AM   #4
Senior Member
 
tuffr2's Avatar
 
Join Date: Sep 2012
Location: Palm Coast Florida
Posts: 10,990
The adaptive base for that Yeti does not look round to me. The words 'Adaptive Base' implies it will work...probably. I did not see how 'Adaptive' it is but because it is tapered to a lesser diameter I think it will work.
tuffr2 is online now   Reply With Quote
Old 03-05-2019, 11:51 AM   #5
Senior Member
 
Mike & Mike's Avatar
 
Alpine Owners Club
Winnebago Owners Club
Join Date: Oct 2005
Location: Home is between Salinas and Monterey, CA
Posts: 241
Thanks all for the replies! That 3 5/8" is the number I was looking for and is the same size as in our Alpine Coach. These Yeti cup holders work fine in the Alpine so it ought to make a good gift for a RAM owner.


Cheers!
__________________
Mike and Mike (Michele)
2017 Winnebago Tour 42HD
Previously: 2004 Alpine 34 FDDS
Mike & Mike is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chevy 3500 Duramax vs Ram 3500 Cummins gdkodiak Trailer Towing and Tow Vehicles Discussion 59 06-25-2016 11:15 PM
RAM-A-CAN Cup Holder Ipad Mount in Entegra? rbr Entegra Owner's Forum 24 04-15-2015 08:55 AM
Magazine rack/coffee cup holder. Rocky 2 Fleetwood Owner's Forum 34 02-03-2012 03:21 PM
Has anyone tried the suction cup door holder? GG1 Winnebago Industries Owner's Forum 9 08-04-2007 02:24 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 05:25 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.