Good morning....I do not have a brake controller hooked up yet....When I go to back up with trailer hooked up it seems that the brakes are on I cannot back up at all...I can pull it forward with no effort...the only way to back up is to unplug the round electric connector...Help thanx
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Ya know that could just be...I need to do a little wiring today..in preperation for the brake controller when it arrives...I will pull look at both connectors today and see how they line up....Thanx for the reply...have a good one...
Ya know that could just be...I need to do a little wiring today..in preperation for the brake controller when it arrives...I will pull look at both connectors today and see how they line up....Thanx for the reply...have a good one...
It wouldn't be the first time somebody miswired the truck connector and 'corrected' the problem by changing the trailer plug
Well I went out and took the truck electrical connector apart and found out that the back up light was wired into the trailer brake....it is all good now, thanx for the post
Well I went out and took the truck electrical connector apart and found out that the back up light was wired into the trailer brake....it is all good now, thanx for the post
I have a funny story about the time I picked up a trailer and the turn signal was wired to the brakes....