Community Forums

buckee · 10-30-2020, 01:57 PM

Went to discount tire had my Ford dually tires rotated and they broke three of my valve stems, I bought the truck used so I having trouble finding replacement valve stem extension. Do any one have any good success with these I run TPMS on them so any feed back would be appreciated, I got some off of Amazon they were junk .

ByeTheWay · 10-30-2020, 04:26 PM

For valve stems I use: One piece Valve Stems http://www.yourtireshopsupply.com/

I use Pressure Pro TPMS. A bit more than most, but you get what you pay for. I tried a cheaper brand but they sent me false alarms.

krivanj · 10-30-2020, 09:31 PM

Napa has good ones.

HDGoose · 10-30-2020, 11:50 PM

Curious, what tire rotation method did you use?

buckee · 10-31-2020, 07:05 AM

They dismounted all tires and from rear to front that is the way it should be done considering mileage I would like to get out them . Just recommend taking your tpms valves and extension off before they do it or stand there and get there full attention while they in process . First dually I owned so when seen the steel wheel I was surprised to see it

ByeTheWay · 10-31-2020, 03:55 PM

Quote:

Originally Posted by HDGoose

Curious, what tire rotation method did you use?

I replace my tires every 7 years, thus I don't rotate them. All of them have a lot of tread when I replace them. I use centramatic balancers on the steer, and don't balance the rears. Size: 295/80R22.5

HDGoose · 11-01-2020, 05:23 AM

Quote:

Originally Posted by buckee

They dismounted all tires and from rear to front that is the way it should be done considering mileage I would like to get out them . Just recommend taking your tpms valves and extension off before they do it or stand there and get there full attention while they in process . First dually I owned so when seen the steel wheel I was surprised to see it

I have read about folks doing that.