Community Forums

IMSYKO · 04-02-2022, 10:16 AM

Hello and thanks for looking.
I am trying to turn on the pump for the fuel transfer system on our new hauler. It is a ECI Fuel System setup and they don't answer the phone on the weekends and the website is not been made functional according to the pop up I get back.
Before I go back there and bypass everything to activate the pump I wanted to check if anyone has this system and if by chance have a wiring diagram or manual for it.
Thanks
Mark

DTG173 · 04-03-2022, 07:35 AM

I see that you have gotten no replies here. I have a 21 419, but no answer for you. I would suggest you try the Keystone forum in link, I have found the folks there to be knowledgeable and helpful as well. Good Luck!
https://www.keystoneforums.com/forums/index.php

JCKeystone · 06-19-2022, 07:55 PM

Hello, You have to push the lock button for a few seconds. After that you can turn it on. Hope this helps

IMSYKO · 06-19-2022, 11:37 PM

Thanks. I finally got hold of the guys at ECI. The panel is garbage. I told them that I was going to elongate it and they were supposed to get with the engineers and get me the spec on the fuel sending unit so I could put 2 gauges in the locking cabinet and retire the pump.
You might find this hard to believe but I never heard back from them.
Keystone couldn’t answer any questions about it so I took it apart and fixed it and good to go. Thanks for taking the time to respond. Much appreciated