Possible fresh water tank overfill
I'm on a multi week trip mostly staying in RV parks and the getting ready put in 35g, 1/3 full on the sensor, to the fresh water tank using one of this inline water meters/counters. Along the way I noticed the fresh water tank sensor now showing 2/3 full. A couple weeks later I noticed that water was coming out the tan k vent on the curb side. Wet bay switches were in the city supply use position, not tank fill. I wiggled the switch positions, drained a bit of water from the fresh tank and took off. I stopped about 30 minutes later at a rest area and water is trickling out from the underlayment on the curb side just aft of the tank vent location. I drained some more and it stopped, The next locations for this trip I'll just almost fill the fresh tank, shut off the water and use the tank and pump for our water usage.
I am suspecting a leak-by for the city water/tank fill switch. I don't want to start pulling basement aft covers to check this and will wait till home. I'm afraid it will be attached too Peg crimp or shark bite for which I don't have the tools. I know no RV tool box can be complete with out them. It baffles me that water is someone in the front underlayment area just forward of the stairs and door.
This is likely the last trip I'll make with this Keystone Raptor 356. My serious motorcycle riding days have ended and don't need the TH if I'm not going to take a bike. I'll keep the bike around the local area rides at home. Will be replacing with a mid-sized C such as Entegra Esteem 29v or a Thor Omni XG32. Toad will be the Ram 1500 Laramie. (my car) Obviously the newly purchases Ram 2020 3500 dually will be sold also. With the HO and AISIN it's be a real pleasure to tow this load
2021 Thor Omni XG32
2012 PT Crusader 355BHQ (GFs)
2020 Ram Laramie 1500 (toad to be)