Hello all,
Me and wife just got a 1998 nash j-26 travel trailer. I upgraded all switches and led lighting. Whoever got into the electrical didnt mark anything so im just going to run new wires so I know its right but I am not sure how it all goes. Has to be a very simple diagram somewhere but everything I see is mind boggling. The guy put solar in and thats simple enough but he unhooked wires that I dont know where they go. I bought a new battery, hooked it up just as old one was. While hooked to shore everything worked beautiful in the day while solar was on but at night boom we would loose all dc. So I bought a new solenoid, he had one of the main red wires unhooked from solenoid on fuse/breaker box. I rehooked that and that changed nothing. So I went ahead and upgraded the converter even though it was working. It has a switch on wall that says charge - on/off. There is a small gauge wire that looks like it goes to the switch and a loose one. I am not sure how this is suppose to operate. Can someone please just tell me how to wire this up? here is what i have so far.. i will update battery to 2 lithium next year but for now I have an :
1. Renogy Deep Cycle AGM 12 Volt 100Ah Battery - up in front
2. light switch that says charge on/off in front inside.
3.
Powermax 110 Volt AC to 12 Volt DC Power Supply Converter Charger for Rv Pm3-45 (45 Amp) that plugs in to a socket under fridge.
4. a salesman switch
5. a solenoid
6. factory breaker/fues box
I would just like a simple for <dummies wiring diagram so I know its right with no more dark nights.
Thank you all and much appreciated