Atwood Water Heater Switch

[Old-Biscuit]

Originally Posted by 7months14day

with the top connector pulled off of circuit board. with electric on voltage on white wire pin to ground 13.1 volts , 0 voltage on orange pin to ground. connector looks good no frayed wires , so i should order a circuit board ? i tend to agree with you. I will post when i get it and installed. I have confidence in you and this forum. You are the best!!!!! . thanks much 4K and 6K linear fiber laser cutters

Get a Dinosaur Electronics replacement board.....much higher quality circuit board vs OEM
UIB 64 page

https://rvcoolingunit.com/Atwood-Wat...-P5225904.aspx

[7months14day]

Will do. Will post results. Thanks much

[7months14day]

WOW! WOW! WOW! ALL I CAN SAY IS WOW. Mr. Old Biscuit you are the very best, that is all i know to say. Thank you very very much, this forum is blessed to have members like you. The water heater works on electric like it should and works on gas like it should and works on gas and electric together like it should. Thanks again

[Old-Biscuit]

It's nice to have HOT water and even better when you can have it faster.

THANKS!

Glad to have been a help ...........