|
04-20-2016, 05:26 PM
|
#1
|
Senior Member
Join Date: Sep 2015
Location: Valley Forge, PA
Posts: 149
|
Does anyone know of a bug screen for this Atwood Exhaust? Can't find anywhere!
The manual says the furnace is an Atwood hydro-flame 8500-IV...I attached a pic of the exhaust. The problem is that the Camco and other maker Mud Dauber Screens don't fit the exhaust. Even the ones that say "for Atwood 8500" on the package don't look like they'd fit (they have the bulge off-centered, and mine is right in the middle as you can see in the pic). The exhaust in the pic (the whole square) measure 5" by 5.5" and the little circular part in the middle has a diameter of about 2 3/4"....I've searched everywhere. Anybody else have this problem? Any suggestions?
Thanks for any help
Dave
__________________
2014 Jayco Jayflight 264 BH
2009 Tundra 5.7 Crewmax w/ Tow Package
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-20-2016, 05:29 PM
|
#2
|
Senior Member
Join Date: Jul 2015
Posts: 680
|
I have the same thing, so I'll be watching.
|
|
|
04-20-2016, 08:28 PM
|
#3
|
Senior Member
Join Date: Sep 2013
Location: West Virginia
Posts: 571
|
Go to Lowe's, buy some aluminum window screen. Cut out a 6x6 square, remove the cover, place screen wire on back of cover/trim plate, replace, trim.
__________________
2022 Keystone Cougar 24RDS
2017 F350 6.7L CCLB DRW 4x4 Ruby Red
|
|
|
04-21-2016, 06:29 AM
|
#5
|
Senior Member
Join Date: Sep 2013
Location: Waynesville Georgia
Posts: 1,307
|
Don't see anything really unusal about your vent ( except 1 not 2 ) the covers pictured attach via a spring with hooks on both end, that engage the cover and the crossbar on your vent, should work ! Here in the south, you have to have em, or mud dappers will definitely nest there !!!
__________________
[SIGPIC][/SIGPIC]Lovin Our Grey Wolf 26RL !! Jim & Pat
|
|
|
04-21-2016, 12:53 PM
|
#6
|
Senior Member
Join Date: Sep 2015
Location: Valley Forge, PA
Posts: 149
|
gazinggm42,
I bought that part number from Camco (it was actually the first one I bought), and it too doesn't fit. The diameter of the round screen is too big (the description even says its 3" diameter and my vent is a little under 2 3/4") and leaves a big gap. This is driving me nuts...
I know I can go the Lowes route but was hoping to use that as a last resort.
__________________
2014 Jayco Jayflight 264 BH
2009 Tundra 5.7 Crewmax w/ Tow Package
|
|
|
04-22-2016, 04:52 AM
|
#7
|
Member
Join Date: Dec 2015
Posts: 98
|
Quote:
Originally Posted by wrvond
Go to Lowe's, buy some aluminum window screen. Cut out a 6x6 square, remove the cover, place screen wire on back of cover/trim plate, replace, trim.
|
This is pretty much what I did with ours except I had some leftover synthetic (plastic type) screen. Cheap and easy.
__________________
Andy
2015 F250 Lariat 6.7 L Powerstroke 4x4
2009 Keystone Outback 268RL
|
|
|
04-22-2016, 06:33 AM
|
#8
|
Senior Member
Winnebago Owners Club
Join Date: Nov 2011
Location: Seeing the USA
Posts: 2,646
|
__________________
Neal and Deb + Mya and Gizmo, the pup's
2003 Winnebago Sightseer 30B
May the roads rise up to meet you, May the winds be always at your back...
|
|
|
04-22-2016, 03:21 PM
|
#9
|
Senior Member
Join Date: Sep 2015
Location: Valley Forge, PA
Posts: 149
|
Thanks for checking, pepper2. I tried this one too. Unfortunately no, b/c the dimensions are 4.5" x 4.5", and my vent is 5 by 5.5.
__________________
2014 Jayco Jayflight 264 BH
2009 Tundra 5.7 Crewmax w/ Tow Package
|
|
|
04-23-2016, 01:34 AM
|
#10
|
Senior Member
Join Date: Jan 2015
Posts: 405
|
Quote:
Originally Posted by wrvond
Go to Lowe's, buy some aluminum window screen. Cut out a 6x6 square, remove the cover, place screen wire on back of cover/trim plate, replace, trim.
|
This is exactly what I would do.
__________________
___________________
2016 Lance 1995
2016 RAM 1500 Laramie Longhorn (Custom)
|
|
|
04-29-2016, 12:30 PM
|
#11
|
Senior Member
Join Date: Sep 2015
Location: Valley Forge, PA
Posts: 149
|
bump
__________________
2014 Jayco Jayflight 264 BH
2009 Tundra 5.7 Crewmax w/ Tow Package
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|