Extra wide trim molding?

[robertrhu]

Hi All!

I'm tackling my first travel trailer remodel with a 1983 22' Komfort Kamper. Been a really fun project!

I'm planning on using extra wide trim for the corners, roof and bottom rail. I'm hoping to figure something out that will cover 2 inches along edges. The top of the roof doesn't need to be 2", but the visible wall edge does need to be. The same goes for the bottom rails. But I would like the corners to cover 2" on both edges.

I've been searching conventional RV trim and haven't found anything. I figure I might be able to use standard house flashing for the roof and bottom rail, but the front and back corners present challenges finding anything other than trim specifically designed for RVs. And searching RV trim I'm not finding anything that wide.

Any thoughts on where I might find RV trim this wide? Or other creative options?

I've attached a photo of the trailer in its current state.

Thanks in advance!
Robert

[Superslif]

It will sure be a head turner...

Are you looking for aluminum or plastic corner trim?

[robertrhu]

I'm hoping aluminum.

The thought path I keep going down is aluminum house trim. But difficult on a curve. Been pondering if a metal fabrication shop might be able to bend house aluminum fascia trim to my corners...