The entry door has a slight bow outwards at the bottom. After it rains I can spot a drop or two of water just inside the door. The real issue is the molding/insulation on either side of the door at the bottom. It's swelled up and exploding out of the door frame from soaking up the water. What I can't figure out is where it's coming in at, it wouldn't come up under the door, around the sides, and into the interior door frame without leaving a river of water. Any ideas?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Yep. Cover the inside of the door with paper towels, using masking tape or something that will keep them in place along the perimeter. Then wait for a rain or use a hose to simulate rain. You should be able to find the leak when you open the door to inspect.
__________________
'04 Newmar MADP, 1100w of solar, Rubicon toad
Linear Mode
