Re-Leveling Issues

[champyun]

I have a 2017 Keystone Outback 332 FK with an auto-leveling system and we are predominately stationary most of the year. Every so often, I go out and re-level the rig. When doing so, a few of my corner scissor jacks will either not rise or lower during the re-leveling. Any ideas as to why this would happen and what can I do to reset or rectify this issue? Thanks in advance.

[Persistent]

Apparently Keystone no longer sells that model. Does it have the optional automatic leveling system?

I have manual scissors jacks. The worm drive needs frequent lubrication. Other pivot and sliding surfaces also benefit from frequent lubrication. I use a spray dry lubricant. Grease or oil collects dirt and eventually makes things worse.

I put blocks or boards under the jack pads to help keep them cleaner and away from corrosive contaminants.

I presume the automatic system has the same issues if it uses scissors jacks.

I wish you good luck and happy trails ahead!

[champyun]

Thanks Persistent. My automatic leveling system is the BAL 7.1. I will give what you suggested a try.