Good day to all. I have an issue regarding my Sunnybrook Sunset Sport 297SL. I'm looking for any owners of the same to help out with getting the "Instruction Manual". Winnebago purchased Sunnybrook without gaining any of the technical resources. I'm at a loss in figuring out :How To" start the water heater, furnace, A/C, fridge or any appliance, gas, electric etc... Any & All help would be appreciated. Even the Slide-Out is messed up. I tried the manual option, but ended up breaking the actuator. The slide out is SNUG at the top, but out 4-5" at the bottom. WHat did I do wrong?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
So I tried to push out the slide out and the inside pushing it out the top right corner does not budge at all the left top corner moved in and out a few inches when pushing. So I'm not sure what's holding up a top right corner slide out.
WOW, I got everything working now. Manually pushed out slide using a large wrench and pipe. I did it on the long, square connecting rod that attaches to the teeth and pulley system. DIdn't break anything either (whew) Charged the battery and hooked up to the 9000w gennie... Now what do these lower RED switches do? https://scontent-iad3-1.xx.fbcdn.net...ba&oe=5CEBE228
Any ideas? ALso where is a good place to purchase blinds. Not the crappy metal ones and not over priced? Also, I need a new ACTUATOR, Mine measure 61" and I can't find that anywhere.. THanks for anything you can provide
The red switches are for the water pump and water heater. If using water from the fresh water tank you need to turn on the water pump to get water. If connected to 'city' water then you do not need the water pump as the city connection provides the pressure to get water out of the faucets. You will need to have water in the water heater before turning on the red toggle switch. So if you turn on the hot water faucet and the winterization valves are turn correctly it will fill the hot water tank. Look for Hot water tank bypass and make sure the bypass is off.