I have a 2017 Holiday Rambler Vacationer. I recently hooked up a Weingard satellite to 2 DISH receivers. Both receivers work but the TVs in the front area (1 above the driver/passenger area and 1 in the outside entertainment center) won't play sound. After trouble shooting with a DISH rep, the rep thinks it might be the HDMI cable. Does this sound familiar to anyone and does anyone know how to access the cable that runs from the front area to the AV cabinet in the master bedroom. Ideas and help would be great.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Thanks. Have done that and settings are correct. I'm afraid it's the cable and that may be a major undertaking to change out. But again, thanks for your response.