Bed Room TV set up

[adonh]

Question, I have a dome satellite system and replaced my old TV in the front of the coach to a new larger screen TV and it works great, I then moved the old smaller TV to the bed room to replace a real small tv in there. I have everything hooked up but on the bed room TV it says no signal. The bed room TV is connected to a box that controls input and the options are Satellite, ant and aux. It is connected with a coax cable. I have checked the input options on the bedroom tv and have have looked at the input choices and my choices are TV which has a coax symbol and HDMI. I have thge box set to satellite. I have Dish tv should I have the channel set to a certain station. Any other thoughts Thanks

[DJJ]

I think Your TV should be or ch 3 or 4.


Jeff

[adonh]

OK, I reset everything on the BR TV and did a new setup, channels, input etc. Its working. The first time I have had the BR TV on since I I got the MR last year. The BR TV on satellite is restricted to what is on the main TV up front controlled by the satellite box. But at least it is working.