Community Forums

kirkcrawford · 06-23-2011, 02:25 PM

Here are my pics of the LCD TV Upgrade I did for my 2000 Bounder 32H.

First is the Old TV:

Old Tube TV by Mozul, on Flickr

It was fairly easy to remove, pulling the fascia off and a little lifting and out comes the TV. Here is what was behind.

TV Out by Mozul, on Flickr
The black metal thing had pins that held the bottom of the old set in.

Next I cut of the angled side pieces and gutted the floor out of the cabinet behind. The wires go to the two dash fans and lights.

Cabinet Gutting by Mozul, on Flickr

This shows the top board for the door installed.

Top Board Installed by Mozul, on Flickr

There are three european style hinges that hold the board.

New Hinges by Mozul, on Flickr

Here it is with the door closed.

New Door by Mozul, on Flickr

I added two window sash latches to hold the door closed in transit.

Door with Latches by Mozul, on Flickr

Latch by Mozul, on Flickr

And the final install with a fixed TV mount. Sorry for the blurry photo, Ill replace it with a better one when I get a chance.

Flat Panel Installed by Mozul, on Flickr

**NLOVNIT** · 06-23-2011, 05:31 PM

Great job.

Betcha you got no more cabinet squeeks since you got rid of the big brick, right? Before we swapped out our CRT with a LED, our cabinets always groaned & creaked under the CRT weight when we had road bumps. I was never so glad to get rid of 80 pounds over my head!

Lori-