|
05-04-2023, 12:10 PM
|
#1
|
Junior Member
Join Date: Oct 2019
Location: Fort Saskatchewan, Alberta, Canada
Posts: 7
|
Melted DashCam
I [S]have[/S] had a Veho muvi KZ-2 Drivecam Pro 4K Dashcam and it melted when installed on the windshield of my truck, the manufacturer says that it is my fault it melted.
Nothing else in my truck melted, I've no issues with anything else just this DashCam. Even the trailer tire pressure monitor display that was mounted beside it did not have any issues just the camera.
However the fact that it melted is somehow my fault???
Mounting a DashCam on a dash should not be done, go figure who knew!
__________________
2022 Rockwood Ultra Lite 2608BS
2022 RAM 2500 Bighorn Cummins Crew 4x4
Three Maltese companions Oxi, Cooper, & Jackson
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
05-04-2023, 12:15 PM
|
#2
|
Senior Member
Join Date: Oct 2017
Posts: 1,937
|
I thought a dash cam mounted on a dash, hmm.
Want to share the brand of the melted dash cam??
__________________
Larry & Sheree & KD the CAT
2009 Holiday Rambler Admiral 30SFS Lewis County, Wa.
USN 1964-68, USS LEXINGTON CVS-16
|
|
|
05-04-2023, 12:18 PM
|
#3
|
Senior Member
Monaco Owners Club Workhorse Chassis Owner
Join Date: Aug 2002
Location: Clovis, CA, USA
Posts: 13,151
|
Wow. I didn't know it got that hot up in Canada. LOL
Hits 110 f , 43 celsius, here where I live and my cameras have held up fine.
Good luck!
__________________
2004 Monaco La Palma 36DBD, W22, 8.1, 7.1 MPG
2000 LEXUS RX300 FWD 22MPG 4020 LBS
Criticism is easier than Craftsmanship
|
|
|
05-04-2023, 12:23 PM
|
#4
|
Senior Member
Join Date: May 2021
Location: Houston
Posts: 541
|
Must be some plastic that doesn’t hold up well to sunlight and heat. I don’t see how you could have weakened or damaged the plastic.
__________________
2018 E450 Forester 2291s
|
|
|
05-04-2023, 11:06 PM
|
#5
|
Junior Member
Join Date: Oct 2019
Location: Fort Saskatchewan, Alberta, Canada
Posts: 7
|
It was a Veho muvi KZ-2 Drivecam Pro 4K Dashcam
__________________
2022 Rockwood Ultra Lite 2608BS
2022 RAM 2500 Bighorn Cummins Crew 4x4
Three Maltese companions Oxi, Cooper, & Jackson
|
|
|
05-04-2023, 11:08 PM
|
#6
|
Junior Member
Join Date: Oct 2019
Location: Fort Saskatchewan, Alberta, Canada
Posts: 7
|
It was 28 degrees Celsius
__________________
2022 Rockwood Ultra Lite 2608BS
2022 RAM 2500 Bighorn Cummins Crew 4x4
Three Maltese companions Oxi, Cooper, & Jackson
|
|
|
05-04-2023, 11:21 PM
|
#7
|
Senior Member
Join Date: Sep 2017
Location: Northern California
Posts: 1,418
|
Does it appear to have been melted from an external heat source (the sun coming through the windshield) or from an internal heat source such as a short on the internal printed circuit board?
If it was sun load, the plastic case may not have been formed from proper thermosetting plastic. I had some remotes for my RF roof fans that got left in the sun still in their bubble wrap (trapped the heat) and curled up into a useless heap.
If it was from internal heat from a "short," it's scary to think what that might have led to.
Seems in either event this is not a brand you want to look to for a replacement.
|
|
|
05-05-2023, 06:32 PM
|
#8
|
Senior Member
Join Date: Jul 2021
Location: Pigeon Forge, TN
Posts: 720
|
Just from looking at reviews online, it seems the entire unit is a ripoff and not worth anything that was paid for it. There's only a few "decent" cams out there for the same price, such as the VIOFO 129/139 Pro or Thinkware U1000.
__________________
2021 Newmar Super Star 4051, Glacier Interior + Exterior
2021 Bravo Silver Star 24'
2019 Kia Stinger GT2 AWD, White Pearl
|
|
|
05-05-2023, 10:13 PM
|
#9
|
Junior Member
Join Date: Oct 2019
Location: Fort Saskatchewan, Alberta, Canada
Posts: 7
|
Quote:
Originally Posted by hclarkx
Does it appear to have been melted from an external heat source (the sun coming through the windshield) or from an internal heat source such as a short on the internal printed circuit board?
If it was sun load, the plastic case may not have been formed from proper thermosetting plastic. I had some remotes for my RF roof fans that got left in the sun still in their bubble wrap (trapped the heat) and curled up into a useless heap.
If it was from internal heat from a "short," it's scary to think what that might have led to.
Seems in either event this is not a brand you want to look to for a replacement.
|
It may not be pretty but believe or not it still seems to work.
__________________
2022 Rockwood Ultra Lite 2608BS
2022 RAM 2500 Bighorn Cummins Crew 4x4
Three Maltese companions Oxi, Cooper, & Jackson
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|