Hi Jes,
John is correct. The AWM975 terminates in a 12-pin and a 4-pin harness connector. As our unit is a factory installed model, in many cases it will simply plug into the OEM wiring during production. However, the radio ships with the mating end to blunt-cut wires for use with aftermarket installation. You would cut & splice these to the applications' wiring (power & speakers).
If you acquired your radio third-party without these included accessories, you may order a service pack through our retail website which includes all accessories for this model; or you may simply cut off the 12-pin (& 4-pin, if needed) connections and splice directly to the OEM wiring.
Feel free to call our Technical Services dept. if you have any further questions. You can reach them M-F 8:00AM - 6:00PM EDT at 877-845-8750.
__________________
ASA Electronics - JENSEN, Voyager, iN-Command & Advent Tech Support Team
|