Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > RV SYSTEMS AND TECHNOLOGIES FORUMS > Technology: Internet, TV, Satellite, Cell Phones, etc.
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-21-2014, 08:37 AM   #1
Senior Member
 
RoamingGnome's Avatar
 
Join Date: Oct 2013
Location: Central Florida
Posts: 116
WiFiRanger Antenna Replacement

I am considering changing the antenna on my WiFiRanger MobileTi to a Engenius Outdoor Hi Gain 8dBi Omni Antenna EAG-2408. I have two questions:1) If I have the unit with this antenna mounted vertically on my batwing antenna, will the narrow antenna radiation pattern be a problem for me trying to communicate with the thing from inside the RV underneath the antenna, and 2) what is the black tape type stuff that the wrap around the connector to weatherproof it - it doesn't look like heatshrink tubing but it does appear to be wrapped and then shrunk somehow?
__________________
Dave & Lynne - Retired & livin' the dream. '04 Bounder W32 on Workhorse W20 chassis powered by GM 8.1L. Visited all 50 states during first 5 years of retirement.
RoamingGnome is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-21-2014, 10:20 PM   #2
Senior Member
 
docj's Avatar
Official iRV2 Sponsor
 
Join Date: May 2011
Posts: 8,305
It's difficult to tell from your post how your system is configured. I'm assuming you have a MobileTi without an indoor Go2 router? I find it difficult to believe that the beam pattern from the Engenius is so tight that there wouldn't be sufficient RF field inside the coach to connect to the devices in your network. I'll check with the technical staff to make sure this is the case.
__________________
Joel (AKA docj)--
RV Technology Specialist
docj is offline   Reply With Quote
Old 03-22-2014, 07:24 AM   #3
Senior Member
 
docj's Avatar
Official iRV2 Sponsor
 
Join Date: May 2011
Posts: 8,305
I spoke to the technical staff and they agree that the "fringing field" will provide more than enough signal for your devices to connect to. You should note, however, that removal of the antenna and the "goop" that seals its connection to the MobileTi will void your lifetime warranty. Getting water into that connection would not be good for the system.
__________________
Joel (AKA docj)--
RV Technology Specialist
docj is offline   Reply With Quote
Old 03-22-2014, 07:31 AM   #4
Senior Member
 
pagosajoe's Avatar
 
Fleetwood Owners Club
Join Date: May 2011
Location: Southwest
Posts: 1,549
I replaced the original WiFi Ranger antenna with an Engenius Outdoor Hi Gain 8dBi Omni Antenna EAG-2408, and it works great. A little silicone sealer and tape, and you're in business.
__________________
Joe and Debbie, Emma the Aussie Cattle Dog who adopted us
2012 Discovery 36J, Blue Ox and Air Force One, 2010 GMC Acadia Toad
USAF (Ret) WDØM https://wd0m.com
pagosajoe is offline   Reply With Quote
Old 03-22-2014, 07:48 AM   #5
Senior Member
 
docj's Avatar
Official iRV2 Sponsor
 
Join Date: May 2011
Posts: 8,305
Quote:
Originally Posted by pagosajoe View Post
I replaced the original WiFi Ranger antenna with an Engenius Outdoor Hi Gain 8dBi Omni Antenna EAG-2408, and it works great. A little silicone sealer and tape, and you're in business.
I wasn't disagreeing with the OP (or you) doing it, I was simply pointing out that doing so voids the warranty. If you are careful sealing the connection there probably won't be any issues, but WiFiRanger can't be responsible for how well customers do this.
__________________
Joel (AKA docj)--
RV Technology Specialist
docj is offline   Reply With Quote
Old 03-22-2014, 03:01 PM   #6
Senior Member
 
vsheetz's Avatar


 
Fleetwood Owners Club
Ford Super Duty Owner
Join Date: Jun 2012
Location: SoCal
Posts: 15,749
Coax-Seal is one such 'tape' used to waterproof connectors. The radiation pattern of the. 8db antenna should work ok.
__________________
Vince and Susan
2011 Tiffin Phaeton 40QTH (Cummins ISC/Freightliner)
Flat towing a modified 2005 Jeep (Rubicon Wrangler)
Previously a 2002 Fleetwood Pace Arrow 37A and a 1995 Safari Trek 2830.
vsheetz is offline   Reply With Quote
Old 03-22-2014, 05:20 PM   #7
Senior Member
 
RoamingGnome's Avatar
 
Join Date: Oct 2013
Location: Central Florida
Posts: 116
Thanks for the responses. Yes the unit is stand-alone without an indoor unit supporting it. I agree that sealing up the connection is critical thats why I asked what the product was that the OEM put on it. I was really disappointed that the high-gain antenna "Marine" version of the WiFiRanger mobile had been discontinued when I went to order it. Will the factory replace the antenna for me and retain the warranty if I send them the parts? I haven't installed the unit yet.
__________________
Dave & Lynne - Retired & livin' the dream. '04 Bounder W32 on Workhorse W20 chassis powered by GM 8.1L. Visited all 50 states during first 5 years of retirement.
RoamingGnome is offline   Reply With Quote
Old 03-22-2014, 08:55 PM   #8
Senior Member
 
docj's Avatar
Official iRV2 Sponsor
 
Join Date: May 2011
Posts: 8,305
The Mobile with Marine antenna was never intended for RV use; it would not have withstood the RV environment and that was stated in the on-line description of the product.

WiFiRanger markets a line of products that we believe meet the needs of most RVers. Owners of WiFiRanger products are free to modify them to meet their specific needs but the company does not engage in custom modifications of its standard product line.
__________________
Joel (AKA docj)--
RV Technology Specialist
docj is offline   Reply With Quote
Old 03-26-2014, 07:41 PM   #9
Senior Member
 
Join Date: Sep 2000
Location: Fulltimer
Posts: 186
As others have said, it is no problem with reception. The beam radials will cover your area without an issue. I have used this setup since the Bullets have been available.

Coax seal will solve the junction issue. You just have to be careful to support the bullet properly. Stress of the antenna on the joint can cause failure. Having the antenna unsupported in a horizontal position while going down the road is likely to induce a problem.
__________________
Jack and Danielle Mayer
2015 New Horizons Majestic 44RLTSS/ Volvo 780
Jack Mayer is offline   Reply With Quote
Old 03-28-2014, 08:02 PM   #10
Senior Member
 
RoamingGnome's Avatar
 
Join Date: Oct 2013
Location: Central Florida
Posts: 116
Ahh so that's the problem. The antenna that comes with the WiFiRanger is mounted directly to the aluminum frame but the EAG2408 does not provide the same mounting provision? Yes that would be a show stopper unless the whole assembly is redone since I plan to mount the system to my batwing antenna where it would be deplyed vertically but stowed horizontally. Thanks for the heads-up on this.
__________________
Dave & Lynne - Retired & livin' the dream. '04 Bounder W32 on Workhorse W20 chassis powered by GM 8.1L. Visited all 50 states during first 5 years of retirement.
RoamingGnome is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Concorde antenna by Braund Mfg exsailor1 Technology: Internet, TV, Satellite, Cell Phones, etc. 2 03-18-2014 05:26 PM
Antenna Bingo AggieDad Winnebago Industries Owner's Forum 11 03-17-2014 05:47 AM
WTB Satellite TV Antenna, Automatic, Stationary, SD, Fold Down CoCoDave Technology: Internet, TV, Satellite, Cell Phones, etc. 10 02-07-2014 07:59 AM
Replacing radio antenna kyrv37 Class A Motorhome Discussions 2 01-27-2014 05:44 PM
Infotainment Center GPS System antenna issue ChrisKW Winnebago Industries Owner's Forum 3 01-19-2014 07:56 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 10:13 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.