10K onan Ginny issue

[sdagro]

While running generator, all appliances as well as receptacles are getting power. A/c 1 and 2 give an E7 error(low/no voltage) while a/c 3 works fine. Checked each one separately and got these results so it’s not overloaded. Any ideas/thoughts? Thanks in advance

[pasdad1]

There are two circuit breakers on the generator itself. Sounds like maybe one breaker is tripped.

[sdagro]

Originally Posted by pasdad1

There are two circuit breakers on the generator itself. Sounds like maybe one breaker is tripped.

That’s what I’m thinking as well. Mine has only one on the outside of cabinet next to start switch. Is there more behind access pane l that are “hidden”?

[sdagro]

It was the breaker. It has a single breaker with 2 poles and one was fried. Thanks for the replies.