i recently got a 97 winnebago adventurer. all the hydralic jacks work and i can hear the motor running when i try to extend the slide. i can also see the hoses moving like they have pressure on em when i push the extend button. but the slide does nothing. any ideas?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
i have a newer slide that if any air is in the system it well not work or move really slow some one could have run it low on ATF and the safety locks if you have them are not letting go guessing
i have a newer slide that if any air is in the system it well not work or move really slow some one could have run it low on ATF and the safety locks if you have them are not letting go guessing
Great suggestion! Make sure your slide locks aren't remaining engaged.
fluid level is good. it uses the same fluid as the jacks. the jacks seem to work good. and if i have someone push the extend i can see the hydraulic lines moving under the coach. locks are unlocked.
Linear Mode
