2 Powerswitch TS30's in 2000 Hurricane
Hi. I've found that the second TS30 is why my genset will run both AC's.
When plugged in (30amp service) only one AC of my choice at a switch.
I'm going to a campground and it's going to be HOT. I've disconnected rear AC from switch and made it an independent circuit. I've got a 50amp wye that will enable me to plug in my 30 amp cord on one leg and plan on plugging the rear ac into the other.
My concern is that will mean 240 volts and how will it affect my powerswitches.
I assume if I disconnect the one that is specific to the AC units from the 5k generator I'll be good.
Does anybody have a schematic of the twin transfer switch setup? Thanks.
|