Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > RV SYSTEMS AND TECHNOLOGIES FORUMS > RV Systems & Appliances
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 02-26-2011, 10:41 PM   #1
Senior Member
 
UFO Pilot's Avatar
 
Winnebago Owners Club
Workhorse Chassis Owner
Join Date: Aug 2007
Location: Sonoma County, CA
Posts: 6,401
50 amp Shore Power, 30 amp on EMS

This morning my 50 amp shore power suddenly went to 30 amp on the EMS panel. I have checked all of the breakers and measured the power thru the transfer switch at 240 volts. Any ideas on what to check or what the problem might be?
__________________
Wayne & Roberta

08 Winnebago Destination 39W Gas UFO Workhorse Chassis......It's really weird being the same age as old people. I thought getting old would take much longer.
UFO Pilot is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-27-2011, 02:02 AM   #2
Moderator Emeritus
 
RV Wizard's Avatar


 
Country Coach Owners Club
Appalachian Campers
Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
Check voltage feeding EMS control board. If it does not see 120/240 vac it defaults to 30 amp power monitoring. This may mean checking the neutral connection as well. Let us know what you find. Also give us the model of transfer switch and EMS. Thanks
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
RV Wizard is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Running the generator while on shore power? Magumba Winnebago Industries Owner's Forum 9 01-14-2010 08:03 PM
Shore Power: Breaker Off before Connecting or Disconnecting Always-RVing MH-General Discussions & Problems 18 11-13-2009 04:10 PM
No AC power from Generator or Shore power Dale777 Alpine Coach Owner's Forum 15 12-20-2007 01:46 AM
Shore Power Questions ...Water Heater, Slides? amanda_h Winnebago Industries Owner's Forum 18 07-13-2007 07:21 PM
EMS not recognizing 50 amp supply Carnles Winnebago Industries Owner's Forum 13 04-22-2007 08:46 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.