Aquajet 55AQUAJET-ARV will not prime - Need advise if it's time to replace.
I need the wisdom from those that have needed to replace a fresh water pump. My Aquajet will not prime. I have tried many things mentioned here on IRV2 with no luck.
The tank is over 3/4 full. I opened the low point drain for 15 seconds, slowly opened and close the tank fill valve, opened multiple faucets and let the pump run for 5 minutes, many combinations. Also opened and cleaned the inlet screen. Put plumbers grease on the o-ring seals. Valved the inlet off and opened the winterizing/sanitizing inlet hose, running for 5 minutes from a bucket of fresh water. No visible leaks on inlets lines or valves.
Posted a YouTube video and has the whining type sound of the pump. Does it sound shot? Is there a way to test it? It's only 4 years old. I read it's against rules to post a link for the video on an initial post, only a reply. After the 1st reply it will be posted
Thanks to all.
p.s. Sorry about the pic orientation.
1989 Beaver Marquis - Hi-Tech - 40ft - Gillig Chassis
2004 Newmar Mountain Aire - Spartan IFS Chassis - ISL 400
2018 Lincoln MKX - Blue OX - Air Force One